 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Transistor 2SB1030, 2SB1030A Silicon PNP epitaxial planer type For low-frequency amplification Complementary to 2SD1423 and 2SD1423A 4.00.2 2.00.2 Unit: mm q s Absolute Maximum Ratings Parameter Collector to base voltage Collector to 2SB1030 2SB1030A 2SB1030 VCBO VCEO VEBO ICP IC PC Tj Tstg Symbol (Ta=25C) Ratings -30 -60 -25 -50 -7 -1 - 0.5 300 150 -55 ~ +150 Unit V 0.45+0.20 -0.10 15.60.5 (0.8) q Optimum for high-density mounting. Allowing supply with the radial taping. 0.75 max. 7.6 s Features (0.8) 3.00.2 (2.5) (2.5) 0.45+0.20 -0.10 0.70.1 emitter voltage 2SB1030A Emitter to base voltage Peak collector current Collector current Collector power dissipation Junction temperature Storage temperature V V A A mW C C 1:Emitter 2:Collector 3:Base 1 2 3 NS-B1 Package s Electrical Characteristics Parameter Collector cutoff current Collector to base voltage Collector to emitter voltage 2SB1030 2SB1030A 2SB1030 2SB1030A (Ta=25C) Symbol ICBO ICEO VCBO VCEO VEBO hFE1*1 hFE2 VCE(sat) fT Cob Conditions VCB = -20V, IE = 0 VCE = -20V, IB = 0 IC = -10A, IE = 0 IC = -2mA, IB = 0 IE = -10A, IC = 0 VCE = -10V, IC = -150mA*2 VCE = -10V, IC = -500mA*2 IC = -300mA, IB = -30mA*2 VCB = -10V, IE = 50mA, f = 200MHz VCB = -10V, IE = 0, f = 1MHz -30 -60 -25 -50 -7 85 40 - 0.35 200 6 *2 min typ max -0.1 -1 Unit A A V V V 340 Emitter to base voltage Forward current transfer ratio Collector to emitter saturation voltage Transition frequency Collector output capacitance -0.6 V MHz 15 pF Pulse measurement *1h FE1 Rank classification Q 85 ~ 170 R 120 ~ 240 S 170 ~ 340 Rank hFE1 220 Transistor PC -- Ta 500 -1200 Ta=25C 450 -1000 2SB1030, 2SB1030A IC -- VCE -100 VBE(sat) -- IC Base to emitter saturation voltage VBE(sat) (V) IC/IB=10 Collector power dissipation PC (mW) -30 -10 -3 -1 Ta=-25C 25C 75C 350 300 250 200 150 100 50 0 0 20 40 60 80 100 120 140 160 Collector current IC (mA) 400 -800 IB=-10mA -9mA -8mA -7mA -6mA -5mA -4mA -3mA -2mA -1mA -600 -400 - 0.3 - 0.1 -200 - 0.03 - 0.01 - 0.01 - 0.03 - 0.1 - 0.3 0 0 -2 -4 -6 -8 -10 -12 -1 -3 -10 Ambient temperature Ta (C) Collector to emitter voltage VCE (V) Collector current IC (A) VCE(sat) -- IC Collector to emitter saturation voltage VCE(sat) (V) -100 -30 -10 -3 -1 Ta=75C 25C -25C IC/IB=10 600 hFE -- IC 160 VCE=-10V fT -- I E VCB=-10V Ta=25C Forward current transfer ratio hFE 500 Transition frequency fT (MHz) -1 -3 -10 140 120 100 80 60 40 20 400 300 Ta=75C 200 25C -25C 100 - 0.3 - 0.1 - 0.03 - 0.01 - 0.01 - 0.03 - 0.1 - 0.3 -1 -3 -10 0 - 0.01 - 0.03 - 0.1 - 0.3 0 0.1 0.3 1 3 10 30 100 Collector current IC (A) Collector current IC (A) Emitter current IE (mA) Cob -- VCB 20 240 IE=0 f=1MHz Ta=25C NV -- IC VCE=-10V Ta=25C Function=FLAT Collector output capacitance Cob (pF) 18 16 14 12 10 8 6 4 2 0 -1 200 Noise voltage NV (mV) 160 120 80 Rg=100k 22k 40 4.7k 0 -10 -3 -10 -30 -100 -30 -100 -300 -1000 Collector to base voltage VCB (V) Collector current IC (A) 221 Request for your special attention and precautions in using the technical information and semiconductors described in this material (1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuit examples of the products. It does not constitute the warranting of industrial property, the granting of relative rights, or the granting of any license. (3) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: * Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. * Any applications other than the standard applications intended. (4) The products and product specifications described in this material are subject to change without notice for reasons of modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (5) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, redundant design is recommended, so that such equipment may not violate relevant laws or regulations because of the function of our products. (6) When using products for which dry packing is required, observe the conditions (including shelf life and after-unpacking standby time) agreed upon when specification sheets are individually exchanged. (7) No part of this material may be reprinted or reproduced by any means without written permission from our company. Please read the following notes before using the datasheets A. These materials are intended as a reference to assist customers with the selection of Panasonic semiconductor products best suited to their applications. Due to modification or other reasons, any information contained in this material, such as available product types, technical data, and so on, is subject to change without notice. Customers are advised to contact our semiconductor sales office and obtain the latest information before starting precise technical research and/or purchasing activities. B. Panasonic is endeavoring to continually improve the quality and reliability of these materials but there is always the possibility that further rectifications will be required in the future. Therefore, Panasonic will not assume any liability for any damages arising from any errors etc. that may appear in this material. C. These materials are solely intended for a customer's individual use. Therefore, without the prior written approval of Panasonic, any other use such as reproducing, selling, or distributing this material to a third party, via the Internet or in any other way, is prohibited. 2001 MAR |
Price & Availability of 2SB1030
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |